Lower perimeter spacer for the rail system

assembly steps of the two clips:

• First, cut the pedestal at the base along the perforation and place the pedestal in the correct position.
• Then place the lower perimeter spacer under the pedestal as shown in the photo. We recommend gluing this clip to the pedestal with installation!
• In a further step, the upper connection clip is inserted into the joist, centered over the lower clip, and finally screwed into place. Now you have the basic framework.
• Finally, cut the vertical plate to the desired height and insert it between the two perimeter spacer

On the basis of the following pictures you can see the installation.