When it comes to wooden and WPC terraces, one thing is particularly important: the correct slope. To achieve this, the use of self-leveling pedestals is extremely helpful.
This is because it allows the correct gradient to be easily adjusted using the base battens, which are mounted on the pedestal. A minimum gradient of 1% – preferably 1,5% – is the usual recommendation of manufacturers.
By adjusting the thread to the required height you determine the desired gradient. The movable head of the pedestal then takes over the rest because it adapts to the desired gradient!
Intermediate pedestal supports can also be installed easily – without the time-consuming installation of leveling discs.
The final result is as follows (to demonstrate the effect, the intermediate pedestals were omitted):
Technical details of the pedestal head
Below we show you the exact dimensions of the pedestal head:
Sample sets for the EasyPro pedestal with self-leveling head
You are welcome to order a sample set for this article. Choose from one of the following sets and select the desired height and the desired joint width out:
With our 3D configurator you can perfectly plan your terrace and compare different installation options! Save time and effort with this free planning program which was specially developed for Ceratrends.
Please follow these steps:
Step 1: Draw the Dimensions your terrace with the given basic shapes (rectangle / shapes) or with the free form
Step 2:Define terrace covering
Under point 2, first select the terrace covering and enter the format of the laid plank – here, for example, the format 240 x 20 x 3cm. A half bond was chosen as the laying pattern.
The following image shows the detailed selection:
Step 3:Define installation type
In the next step, you specify that the installation should be done on pedestals. You also define the type of pedestal used (with fixed head or self-leveling).
Very important: here you determine which height of the substructure beam you want to use!
Step 4:: Determine the construction heights
As a last input point, please define the total heights (= construction heights) at all drawn corner points.
If you want to enter additional height reference points (e.g. drainage in the middle of the terrace) please use the option 'add additional height reference point'. This is necessary so that the configurator can calculate the correct heights of the pedestal supports!
Step 5: Display intermediate results
At this point you can view the intermediate results in 2D or 3D view.
Here is the 2D view first – click on 'Substructure' in the middle menu
Now for the 3D view, which you can access by clicking on the '3D' button. Since this application is very computationally intensive, the display can take 30 - 60 seconds!
By hiding the display of the covering in the 3D menu, you can now also view the 3D view of the substructure. In this example, this seems a bit complicated – but remember that we have decided to lay the floorboards staggered:
Step 6: Option drainage channels
In the next step you can define on which sides drainage channels should be placed. There are various options here that you can try out!
The configurator then displays the channels taken into account as a light blue area.
Step 7 – View material lists and save the plan as a PDF
In this step you can look at the material lists that you would need according to the current planning status. You will also immediately see the costs involved. To get to the material list, click on 'Material list' on the right
Finally, you can also save the entire plan as a PDF. This is done using the button at the bottom left of the configurator.
Return options if you order too many pedestal supports!
Save time, money, and effort – we take back unwanted pedestals and accessories from the 'EasyPro' series!
You can't estimate your needs exactly or want to order a little more for eventualities? A good idea! We accept returns of unused pedestal supports within 2 months of the date of purchase. The prerequisite, of course, is that we can sell them again.
This means: the pedestals
must not be dirty
must not show any signs of use (scratches on the surface or the like)
arrive undamaged
What is the maximum number of pedestal supports we can take back?
We take back a maximum of 10% of the ordered quantity per delivery item!
An example: – You order 200 pieces with a height of 3,3-6,8 cm and 100 pieces with a height of 6,7-15,0 cm. – We take back a maximum of: 20 pieces of height 3,3-6,8 cm and 10 pieces of height 6,7-15,0 cm.
Return of accessories of the 'EasyPro' pedestal series:
We also take back accessories that are no longer needed – up to a maximum of 10% of the ordered quantity. This only applies to the following articles:
– EasyPro edge trim clips – Edge finishing clip for all pedestal types – building protection pads
How is the return processed?
The return is made via our return center
Please register your return with us at the returns center. Here you will find out – which items you can return to us and in what quantity – how much the expected refund amount will be. – all information about the refund and – to which address you should send the goods.
using the payment method you chose when making your purchase – more information can be found in the Returns Center.
Are manipulation costs deducted?
Yes, costs will be deducted - however, these are small and amount to 5% of the value of the goods, but at least EUR 9. These costs are below our cost price and represent only a part of the effort that would be required for the entire processing of a returns process.
6 reviews for EasyPro pedestal support for wood & WPC | self-leveling
Reviewed with 5 of 5
Otto
The quality is simply outstanding. The entire process, from ordering to delivery, was fantastic. Questions were answered immediately. I hope it always goes this well.
Otto
The quality is simply outstanding. The entire process, from ordering to delivery, was fantastic. Questions were answered immediately. I hope it always goes this well.
Verified purchase. More information
Markus
Good price, good quality and fast delivery
Verified purchase. More information
Marcus M.
Excellent quality at a good price, very fast delivery
Verified purchase. More information
Kurt
Verified purchase. More information
Nikas S., Bremen
Excellent piece. Clear recommendation. I would order again.
Not verified purchase. More information
Richard M., Duisburg
Functions as described. Fast delivery. Would buy again.
Not verified purchase. More information