Edge trim for Smart Wabic raised floor
On this page we will answer the following questions:
- How do I secure the slabs against slipping and how do I protect an adjacent wall?
- How do I cover an open terrace edge?
– which has different heights?
– which has the same height?
Wall termination
The panels must generally be secured at the edges to prevent slippage. This is also the solution for connecting them to an adjacent wall.
Edge finish of open sides with a slanted edge
Often, slopes in the subsoil are leveled out, creating an open edge with varying heights.
Edge finish on open sides with equal heights
Here you can see the possible solutions for open edges with the same installation height.
system comparison
Here you can find a comprehensive system comparison of the products offered for the topic 'edge finishing for raised floors'.
The wall termination
The installed panels must be secured against slipping. Our edge trim clip, which is attached to the raised floor, serves this purpose.
This also provides the best protection against adjacent masonry!
The solution for wall finishing – the edge trim clip
The solution for the edge lies in a single product: the edge finishing clip.
This fulfills the following functions: it
- holds the outermost plate and
- creates a distance to the masonry
Mounting the edge clip on the raised floor
You'll see – the edge clip is easy and quick to install.
Here you can see the individual steps:
1. Applying the edge clips
Place the edge clips on the raised floor.
2. Screw on the edge clips
Screw the edge trim clips directly into the raised floor using the enclosed flat head screws.
3. Cutting the adjacent support pad and positioning the plate
Finally, the support pads are placed underneath and the slab is laid. Done!
Your advantages with our edge finishes
Edge finishes for open sides with slanted edges
Do you need to compensate for different heights – as shown in the symbolic image? Here you will find our solutions.
The edge trim
This edge trim system is the most elegant solution for raised floor terraces with a slope, as it uses the existing terrace slab as a trim and adapts flexibly to any gradient. The discreet aluminum retaining strip at the top edge is a perfect color match for a wide variety of terrace coverings.
Installing the edge trim – here's how it works
The installation of the edge trim is very easy.
The following points show how easy it is to install the edge trim:
1. Applying the edge trim
Place the edge trim on the raised floor. Optionally, you can glue or screw it to the raised floor.
2. Trimming the edge plate & applying the adhesive
Trim the vertical edge plate to the desired height.
Then bring our hybrid adhesive dot-like on the edge veneer.
3. Glue on the edge plate and secure it.
Now insert the trimmed vertical edge plate into the vertical groove of the edge trim.
Finally, press the edge plate firmly against the edge trim. Secure the edge plate during the drying phase – done!
Frequently asked questions about the edge trims for the Smart Wabic raised floor
Questions about edge trimming of raised floors
-
Can the edge trims also be used for parallel terrace edges?
Yes, the edge trims can also be used for parallel edges.
-
Can the edge trims for the raised floor be supplied cut to size?
No, we're sorry, but that's not possible. The edge trims are always supplied in a length of 2,70m.
-
Can the edge trims be mitered?
Yes, this is easily possible using a miter saw. Please use a cutting blade suitable for aluminum.
-
Which screws do you recommend for attaching the edge trims?
We recommend the following screw type:
Flat head screw, countersunk head, full thread
A2 – 4 x 16 – TX20
d = 4mmPlease pre-drill the edge trim before using the screws.
Edge finishes for open pages with parallel edges
Does your raised floor system have a uniform height range?
Our edge trims are the first choice for this.
The edge trims
This universal edge trim impresses with a wide selection of colors and heights up to 18 cm, elegantly concealing any substructure. Thanks to the precisely fitting corner pieces and connectors, you achieve a flush finish perfectly suited to 2 cm thick floor coverings.
Installing the edge trim – here's how it works
The installation of the edge trim is very easy.
The following points outline the procedure:
1. Applying the edge trim
Place the edge trim on the raised floor. Optionally, you can glue or screw it to the raised floor.
2. Place the plate on top - done
Now place the plate on top. And that concludes the assembly instructions.
Frequently Asked Questions (FAQs) about Edge Cladding
Questions about the edge linings of the raised floor
-
Can I also use the edge trim for 3 cm thick panels?
The system is technically designed for a Panel thickness of 2 cm (Porcelain stoneware or natural stone) optimized to ensure a flush top edge. With thicker slabs, a slight offset may occur at the top edge. In this case, you should check beforehand whether the visual edge meets your requirements or whether you need an alternative profile.
-
How is the edge trim attached to the raised floor?
The edge trim is usually just laid on top, as the weight of the panel itself holds the edge trim in place.
However, we recommend supplementing these with gluing or to fasten with screws. -
Is it possible to order specific lengths for the edge trim?
No, we're sorry, but we always supply the edge trims in a length of 2,70m.
System comparison: The three edge finishing types for the Smart Wabic raised floor
When used with the SmartWabic raised floor system, choosing the right edge trim is crucial for the success of your project. The table below shows the most important comparison criteria:
Planning with our configurator
You can of course also plan the raised floor using our configurator.
Free and without registration!
sample sets
Are you unsure whether our raised floor is the right solution for you?
Then simply order a sample set and see for yourself the quality of our raised floor system!
Your benefits
Solid packaging
for safe transport
Fast delivery
with selected partners
Professional quality
for the highest demands
10 years warranty
on all our pedestals