Edge finishing solutions for the Slim Easy rail system
On this page we will answer the following questions:
- How do I secure the slabs against slipping and how do I protect an adjacent wall?
- How do I cover an open terrace edge?
– which has different heights?
– which has the same height?
Wall termination
The panels must generally be secured at the edges to prevent slippage. This is also the solution for connecting them to an adjacent wall.
Edge finish of open sides with a slanted edge
Often, slopes in the subsoil are leveled out, creating an open edge with varying heights.
Edge finish on open sides with equal heights
Here you can see the possible solutions for open edges with the same installation height.
system comparison
Here you can find a comprehensive system comparison of the products offered on the topic of 'edge finishing for the rail system'.
The wall termination
The installed panels must be secured against slipping. Our upper edge clip, which is screwed to the aluminum base profile, serves this purpose. This clip also protects the masonry from damage.
3-in-1 multi-talent: The upper edge clip for your Slim Easy rail system
The complete solution for a technically perfect edge finish is contained in a single, innovative component: the upper edge clip for Slim Easy. This multifunctional element performs three critical tasks on your patio:
-
Maximum stability: It securely fixes the outermost terrace slab and prevents any slippage at the edge.
-
Protection for the masonry: It defines the exact distance to the house wall, which ensures optimal drainage and protects your masonry.
-
Installation of the edge trim: It acts as a stable anchor point to attach a vertical plate for a visually appealing result if needed. edge cladding to keep.
Mounting the edge clip on the Slim Easy rail system
The top edge clip is very easy to install.
Attach – Screw on – Place the plate on top – Done!
Here you can see the individual steps:
1. Applying the top edge clip
Place the top edge clip into the base profile and screw it in place using the included screw.
2. Placing the record
Place the plate on top.
Your advantages with our edge finishes
Edge finishes for open sides with slanted edges
Do you need to compensate for different heights – as shown in the symbolic image? Here you will find our solutions.
The edge trim
Experience the most technically advanced method for perfectly finishing rail systems with varying installation heights. edge cladding sets new standards in optics and technical integration:
-
Architectural continuity: By directly using your original patio slabs as a vertical panel, you create an aesthetically cohesive and elegant overall look for your outdoor area.
-
Dynamic terrain adaptationThe system flexibly compensates for any individual slope of the substrate – the ideal solution for demanding terrace projects with gradients.
-
Delicate lines: An extremely narrow, inconspicuous aluminum rail forms the upper edge and blends discreetly into modern architectural designs.
-
Constructive longevityThe robust mounting structure guarantees a permanently stable fixation of all cladding elements, even under changing weather conditions.
-
Exclusive color paletteChoose from three high-quality options to match your individual flooring: Anthracite, Light gray or Light beige.
Smart alternative: Height compensation through combined edge clips
Are you looking for a particularly economical way to compensate for varying heights on your patio? The combination of upper and lower edge clips offers a smart alternative to traditional profiles:
-
Maximum cost efficiency: Since the upper edge clips are absolutely necessary for the stable fixing of your patio slabs anyway, you save valuable material costs by simply adding the lower clips.
-
Intelligent gradient compensation: The system was specifically designed to flexibly cover different distances between the substrate and the top edge of the panels – such as on sloping terrain.
-
Material all-rounder: This solution is highly compatible and suitable for both standard and solid floor coverings. 3 cm thick patio slabs.
-
Clean finish: They achieve a flush, vertical finish that is technically perfectly matched to your substructure and visually appealing.
How to install the upper and lower edge clips
The upper edge clips are installed in the following steps:
1. Mount the upper clip
The upper clip is mounted by placing the edge clip into the base profile and then screwing it in place.
2. Cutting off the pedestal support (preparation for receiving the lower clip)
The 'EasyPro' pedestal support underneath must be cut off at the base using a jigsaw.
The cutting line is located 2mm outside the pre-cut.
3. Apply the adhesive dots to the lower edge clip and attach the lower clip.
Now apply six to eight adhesive dots of our Hybrid kleptons on the lower edge clip and attach the lower edge clip to the pedestal support as shown in the photo.
Frequently Asked Questions (FAQs) about the top and bottom edge clips
Questions about the upper and lower edge clips for the rail system
-
Are the top and bottom edge clips visible after installation?
Yes, the edge clips are visible.
-
Why should the bottom edge clips be glued on?
The adhesive is used for safety reasons to prevent the lower edge clips from shifting.
-
Are the top and bottom edge clips also suitable for 3cm thick panels?
Yes, we offer special top and bottom edge clips for 3cm panels.
Edge finishes for open pages with parallel edges
Does your rail system have a uniform height range?
With our edge trims and our new 'Sideline' system, we offer you two excellent solutions!
Versatility meets design: The edge trim for perfect results
Give your patio a professional finish. Our edge trim offers an elegant solution to conceal the technology beneath your surface:
- Elegant concealmentThe entire substructure is discreetly and elegantly concealed.
- Flexible installation heightsThe system covers heights of up to 18 cm effortlessly.
- Seamless opticsThanks to precise corner pieces and connectors, you achieve a clean overall look.
- Optimal fitSpecifically for patio slabs with a thickness of 2 cm
- Three beautiful colorsChoose one that matches your flooring. Anthracite, Light gray or Light beige.
The simple installation of the edge trim on the Slim Easy rail system
As you can see, the following is how the edge trim is installed:
1. Applying the edge trim
Place the edge trim on the Slim Easy rail system. Optionally, you can also screw the edge trim to the base profiles for additional security.
2. Place the plate on top - done
Now place the plates on top.
Frequently Asked Questions (FAQs) about Edge Cladding
Questions about the edge trims for the rail system
-
Can I also use the edge trim for 3 cm thick panels?
The system is technically designed for a Panel thickness of 2 cm (Porcelain stoneware or natural stone) optimized to ensure a flush top edge. With thicker slabs, a slight offset may occur at the top edge. In this case, you should check beforehand whether the visual edge meets your requirements or whether you need an alternative profile.
-
Is it possible to order specific lengths for the edge trim?
No, we're sorry, but we always supply the edge trims in a length of 2,70m.
-
Can the edge trims for the rail system be planned using the 3D configurator?
Yes, the edge trims can be used with our 3D configurator It can be planned. Just give it a try!
Sideline – the new edge trim up to 12cm
Maximize the aesthetics of your patio without breaking the bank. The new Sideline edge trim In elegant anthracite, it is the smart answer for anyone looking for a professional look with an outstanding price-performance ratio:
-
Assembly in secondsSideline is simply hooked into the upper edge clip without tools – the fastest method for a clean terrace finish.
-
Discreet system concealmentThe entire substructure disappears elegantly behind the cladding, so that only the purist design remains in focus.
-
Optimized altitude rangeThe system was specifically designed for compact installation heights of up to 12 cm It develops and effortlessly covers this area.
-
Modular PrecisionThanks to precisely matched corner pieces and connectors, you achieve a flush and seamless overall appearance along the entire length.
-
Specialized fitThe technical design is perfectly suited to the use of 2 cm thick patio slabs (e.g., porcelain stoneware) calibrated.
System comparison: The five edge finishing options for the Slim Easy rail system
In conjunction with the rail system, the correct choice of edge trim is crucial for the success of your project. The table below shows the most important comparison criteria:
Planning with our configurator
You can of course also plan the raised floor using our configurator.
Free and without registration!
Sample sets for our rail system
Are you unsure whether our rail system is the right solution for you?
Then simply order a sample set and see for yourself the quality of our raised floor system!
Your benefits
Solid packaging
for safe transport
Fast delivery
with selected partners
Professional quality
for the highest demands
10 years warranty
on all our pedestals